The JBA 250 series twin compressor bracket enables a concealed fit for all variants of the ARB compressor range including both single and twin variants as well as brushed and non-brushed variants. JBA also offer mounting options for the ARB manifold and air outlet locations.   
 
JBA have also developed our range of pre-made kits to make your individual configuration installation easy. Our kits include all mounting brackets required from JBA to mount your air/switch/manifold preference and a listing for all hoses and joiners required from ARB (ARB hoses and joiners not sullied by JBA and to be sourced from ARB). 
 
The standard mounting options include
- Air and switch mounted inside the quarter panel with access next to jack (KIT2)
- Air and switch monted on a drawer system front fascia (KIT3)
- Both above kits also available with manifold installation option also (KIT 6 and 7)
 
A key aspect in the development of this bracket was ensuring that the storage pocket on the passenger side was retained. To achieve this, the development of some new innovative parts was required including a relay block relocation bracket when fitting a manifold or quarter panel mount air/switch outlet option. 
 
This does mean the installation is a little more involved than a standard bracket and will take a bit longer and also with the added brackets, means this bracket is slightly more than other brackets. The end result though is a brilliantly thought out mounting option which maximises all possible mounting configurations and is fully compliant with all of our newly approved ADR certification. 
 
KEY FEATURES
Proudly Australian made and owned
ADR certified and compliant
Made from 2mm powdercoated steel
Offers a neat installation solution 
 
IMPORTANT FITTING NOTES
Mounts behind the passenger side quarter panel.
Some drilling required for twin compressor variants- requires 3 x captive nuts to be installed.
Rear storage compartment is retained and does not require removal. 
Jack location and mounting also retained with removal not required. 
Refer to the fitting instructions for suggested fit times and an overview of steps required.
The ARB 4L tank is unable to be installed into the 250 Prado due to space restrictions.
Refer to the fitting kit chart above for items in red required through ARB (not supplied by JBA) to complete the different kit installations.  
 
Fitting Instructions
JBA 250 series TJM Dual Compressor Fitting Instructions