IP AUSTRALIA DESIGN REGISTRATION NUMBER 202519247
 
The JBA 300 Series 11/21+ slimline battery tray offers a sleek, factory fit option for mounting a second battery in behind the passenger side quarter panel. This battery tray option is perfect for applications where the 3rd row of seats can be retained and no drawer system is installed. 
 
The JBA tray is specifically designed to suit the Revolution 100A slim line battery which enables the perfect fit in this location. The battery tray also allows for the fitment of the TJM single and ARB compressors to be mounted to the rear of the same bracket. 
 
The battery tray suits all makes and models and will require the rear jack and subwoofer (if fitted) to be removed. 
 
JBA also offer an optional DCDC and fuse mounting bracket. This optional configuration can vary depending on charger type and model variant. Please refer to the fitting cahrt and important fitting notes below.  
 
The JBA fuse/anderson plug mount comes with pre-drilled provisions for 3 x ANS-H type midi fuse holders only (will not suit other types of fuse and fuse holders not included). The fuse holder bracket is not compatible with the compressor outlet bracket and only one option can be selected for this location.   
 
Optional accessories including fuses/anderson plug, fuses and compressor outlets fitted are suggestions only for demonstration purposes and not included with the kit. 
 
Key product information
Battery Tray Made from 2mm powdercoated steel.
Tested and rated to ADR3/04 ensuring product safety.
100% Australian designed and manufactured
 
Important Fitting notes
Suits all models and variants 
Requires removal of jack and subwoofer (if fitted)
DCDC mounting bracket will suit TJM/Projecta 25A and Redarc classic 25A and enable view to indicator LEDS on charger 
Other models of DCDC chargers including Redarc Alpha can mount to the rear of the bracket but to access indicator LEDs and reset buttons requires panel to be pulled back. 
 
Suggested Fit Times
Preparation and mounting of battery tray                                              60-90 mins
Removal and refit of panels and seats                                                      60-75 mins
Preparation and mounting of DCDC bracket (if required)                30-45 mins
Preperation and mounting of crompressor                                             90-120 mins
Electrical wiring and fitting of outlets/accessories*                            90+ mins
* wiring time will vary considerably depending on individual setup.  
 
Fitting Instructions
JBA-BT404B Fitting Instructions V1